Ir arriba
Información del artículo

Influence of needle design and irrigation depth in the presence of vapor lock: A computational fluid dynamics analysis in human oval roots with apical ramification

G. Loroño, J.R. Zaldivar, A. Arias, S. Dorado, J.R. Jiménez-Octavio

International Journal for Numerical Methods in Biomedical Engineering Vol. 39, nº. 8, pp. e3742-1 - e3742-10

Resumen:

This paper aims to study the removal of a vapor lock located in the apical ramification of an oval distal root of a human mandibular molar, simulating different needles and irrigation depths with computational fluid dynamic. A geometric reconstruction of the micro-CT of the molar shaped up to a WaveOne Gold Medium instrument was used. A vapor lock located in the apical 2 mm was incorporated. Geometries with positive pressure needles (side-vented [SV], flat or front-vented [FV] and notched [N]) and the EndoVac microcannula (MiC) were created to run the simulations. Irrigation key parameters (flow pattern, irrigant velocity, apical pressure, wall shear stress) and vapor lock removal were compared among the different simulations. Each needle behaved differently that is, FV removed the vapor lock from one ramification and had the highest apical pressure and shear stress values; SV removed the vapor lock in the main root canal but not in the ramification and reached the lowest apical pressure from the positive pressure needles; N was not able to completely remove the vapor lock and showed low apical pressure and shear stress; MiC removed the vapor lock from one ramification, had negative apical pressure and the lowest maximum shear stress. The main conclusion is that none of the needles showed complete removal of vapor lock. MiC, N, and FV were able to partially remove the vapor lock from one out of the three ramifications. However, SV needle was the only simulation that showed high shear stress with low apical pressure.


Resumen divulgativo:

Simulación CFD de la eliminación de vapor lock en una ramificación apical de una raíz distal oval de un molar mandibular humano. Ninguna de las agujas utilizadas mostró una eliminación completa, y solo con la de salida lateral se alcanzó una tensión cortante alta con una presión apical baja.

 


Palabras Clave: apical delta, computational fluid dynamics, microCT, negative pressure irrigation, positive pressure irrigation, vapor lock


Índice de impacto JCR y cuartil WoS: 2,100 - Q2 (2022)

Referencia DOI: DOI icon https://doi.org/10.1002/cnm.3742

Publicado en papel: Agosto 2023.

Publicado on-line: Junio 2023.



Cita:
G. Loroño, J.R. Zaldivar, A. Arias, S. Dorado, J.R. Jiménez-Octavio, Influence of needle design and irrigation depth in the presence of vapor lock: A computational fluid dynamics analysis in human oval roots with apical ramification. International Journal for Numerical Methods in Biomedical Engineering. Vol. 39, nº. 8, pp. e3742-1 - e3742-10, Agosto 2023. [Online: Junio 2023]


    Líneas de investigación:
  • Biomecánica

pdf Previsualizar
pdf Solicitar el artículo completo a los autores